[INCH-POUND]
A-A-52144
January 14, 1994
COMMERCIAL ITEM DESCRIPTION
ICEMAKER-DISPENSER: WITH WATER DISPENSER ATTACHMENT
The General Services Administration has authorized the use of this Commercial Item Description in preference to MIL-I-43682.
1. ABSTRACT
1.1 Abstract. This commercial item description covers icemakers-dispensers with water dispenser attachments, in the following types, grades, sizes, and styles:
Type I- Air-cooled condenser
Type II- Water-cooled condenser
Grade A- Corrosion-resisting steel
Grade B- Low carbon steel
Size 1- 525 pounds per day minimum (at 70°F ambient air temperature)
Size 2- 200 pounds per day minimum (at 70°F ambient air temperature)
Style 1- Floor style
Style 2- Counter style
1.2 CID based part identification number (PIN). A document based PIN to identify type, grade, size, and style of items is included in section 5. This identification numbering procedure is for Government purposes and does not constitute a requirement for the contractor except as information on “Government unique” data nameplates (see 5.4).
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data which may improve this document should be sent to: Commander, U.S. Natick Research, Development, and Engineering Center, ATTN: SATNC-WEE, MA 0176-5018. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business